Some New Buildings (Total Battle Miniatures)

As regular readers of this blog might have noticed, my stash of 15mm Central European buildings is starting to look rather shabby.  Aside from a few very nice farms bought in 2015 from Tiger Terrain for the Waterloo Bicentennial refight (which reminds me – I haven’t done an article on those!), all of my scenery dates from the late 1980s and early 1990s (as seen in this photo of my Lobositz 1756 demo game from a 1998 copy of Wargames Illustrated).   

As can be seen, the core of my existing collection is a load of resin and stonecast models once manufactured by The Drum.  This beautiful, though small range was later taken over by Mayhem Miniatures, and is now owned by SHQ, but the moulds are sadly now in a very bad state, judging by some ex-The Drum Spanish buildings I bought from them in 2019.  The Drum’s models were absolutely beautiful when they were new, but mine have taken a lot of knocks over three decades, with the stonecast ones being particularly prone to chipping. If you look very carefully at the photo above, they were already chipped in 1998 and the church had already lost the tip of its spire!

The rest of my existing buildings are a set of ‘Germanic’ resin models by Hovels which I had for Christmas in the 1980s (I think all Napoleonic wargamers of that era have had that set in their collection at some time) and a load of timber-frame houses scratch-built for me from card, foamboard and balsa by my good friend, the extremely talented Gareth Beamish.

As it happens, I wasn’t actually looking for a load of new scenery, but I was looking for an Essling(ish) Granary and Aspern(ish) Church for my forthcoming Aspern-Essling refight.  My mate Phil Portway then pointed out that a company I’d never heard of called Total Battle Miniatures (TBM) did a Esslingish granary model that would fit the bill.  I ended up getting the granary… along with a Town set, a Village set and a couple of Hamlet sets…

The curious feature of this range is that every building is designed to perfectly fit into a 50x 50mm or 50x100mm recess on the village tile.  The tiles then have hedges and walls moulded on.  the Hamlet tile is shown above, with some 15mm figures and TBM buildings shown for scale.  

The flexible nature of the tiles means that they MUST NOT be painted with spray paint, as that will simply crack and flake off.  TBM recommend using acrylic paint, but I experimented with my usual thinned Humbrol enamel and it worked absolutely fine, though did stay sticky for a few weeks afterwards, which was strange. 

Having since painted two more tiles, they have now been painted for over six months and show absolutely no sign of cracking or flaking, so I’ll stick with enamel paint (I still have the large Town tile left to paint).

Here’s the Hamlet tile again with some different buildings.  The casting was exceptionally clean and crisp on these models and there was absolutely no clean-up required whatsoever.

As with almost all wargames scenery, the scale-footprint of the buildings is reduced, otherwise the larger buildings (such as Essling Granary) would be absolutely gigantic on the table and in terms of game ground-scale would be as long as a 12pdr can shoot!  It’s an eternal problem with wargame scenery, especially when we want to have famous buildings on the table, but which then fill an unhistorically-large area of the battlefield (e.g. Essling Granary and the Waterloo farms).  The solution used by TBM seems to have been to exaggerate the vertical scale to make the large buildings look big, while keeping the footprint the same as the small buildings (50x100mm) and I have to say that it works really well!  It might not be to everyone’s taste, but it works for me.

Note that the church supplied with the town set comes with three alternate spires – a tiled spire, a lead/copper-clad spire and a copper-clad onion dome.  I’ve drilled and pinned them, so I can swap them around from game to game.  The lead-clad spire is shown above and the tiled spire is shown here.  If you buy the church as an individual model you pick which spire you want.

Lastly, here’s the church with its copper-clad onion dome.

I do like my new buildings.  They’re already serving as back-drops for new photos and I can’t wait to get them in a game. 🙂 

This entry was posted in 15mm Figures, Eighteenth Century, Napoleonic Wars, Scenery and tagged . Bookmark the permalink.

10 Responses to Some New Buildings (Total Battle Miniatures)

  1. Ian M Dury says:

    Lovely buildings and I like the concept. Gven the whole ground re vertical scale issue, I tend to use ‘N’ gauge or even smaller buildings with my 15 mm armies – I am currently finishing a set of modular 4″ x 4″ desert tiles for Sudan or French in Egypt games where the buildings and palm trees are actually for between 1:200 and 1:300 scale – but surprisingly they work!

    • jemima_fawr says:

      Thanks Ian! Yes, ‘N’ Gauge buildings work beautifully with 15/18mm figures and in the past we used exclusively N Gauge German plastic kits (mostly Faller models, I think?) for our AB Figures Wargames weekends. Funnily enough, I’ve just found an old copy of Wargames Illustrated with photos of our Auerstadt 1806 mega-game, so will post those later. 🙂

  2. Ian M Dury says:

    I’ll be interested to see those pictures. The other option if you want continental buildings are some of the superb card models produced by companies like Schreiber- Bogen. Somewhere I still have (mostly still waiting to assemble) a complete card walled German village – I think 1:87 scale, but many of the buildings fit really nicely into a small ‘footprint’

    • jemima_fawr says:

      My very first wargames scenery was Schreiber card buildings! 🙂 Long-gone now, but there’s a whole city of them down at the club. Being true-scale they’re all rather large, even at N-Gauge, so they’ll probably come out when we finally do Dresden, Smolensk or Leipzig.

  3. Dean O says:

    A really fabulous and helpful post. Many thanks! I will have a boo at this manufacturer, which I did not know either, until reading your review.

    • jemima_fawr says:

      Cheers Deano! Yeah, they’d slipped entirely under my radar until very recently. Same happened with Tiger Terrain back in 2015 – I’d never heard of them, but they’d been around for years.

  4. Dean O says:

    I just looked up Tiger Terrain also; in business 16+ years though I had never heard of them. Great stuff too, though it appears the company is not taking new orders at the moment.

    • jemima_fawr says:

      Yeah, someone told me just before Christmas. I sincerely hope they come back, as their buildings are the best I’ve seen, both in terms of modelling and in casting quality. The Waterloo buildings are also superb in terms of design, being ‘reduced-footprint’ versions of the actual buildings, while still looking absolutely correct.

  5. Dean O says:

    The proprietor appears to have done this previously, as I assume he has a production limit. I think I will email to ask. Only wish he did 1809 or 1813 specific structures too!! So, thanks for both of those company tips.

    • jemima_fawr says:

      Somebody did tell me the reason a few weeks ago and I’ve got a horrible feeling that health might be the reason, or simply real life getting in the way (it’s a sideline, not a full-time job).

Leave a Reply to Ian M Dury Cancel reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.